Wooden market stall by HÜTTENCOMPANY as a Christmas market stall with bell tower, string lights and open hatch
Individual roof styles · Made in Wanzleben

Market stalls and wooden market huts from our own factory

Whether you call it a Christmas market stall, Christmas market hut, market stand or wooden market stall: we build them ourselves in Wanzleben, for showmen, caterers and event organisers. As standard from 2.00 to 8.00 metres long on a hot-dip galvanised steel frame, custom sizes on request.

Enquire about a market stall Free · no obligation · a few lines are enough
Standard lengths
13
Length
2.00 to 8.00m
Width
approx. 2.55m
Roof styles
4
From the fairground tradeFamily business in its 7th generation
Flexible loadingWith jacks, or by crane with accessories
Manufacturing in GermanySteelwork, timber and fit-out in Wanzleben
After-sales serviceSpare parts, repairs and conversions
Buying advice

Buying a Christmas market stall: what matters

Whether you want to buy a market hut or a Christmas market stall: four points decide how well the stall suits your pitch and your products. We come from the fairground trade ourselves, know market day from the other side of the counter and clarify these points with you before we quote.

Length to suit your pitch

Measure the frontage of your pitch. We build 13 standard lengths from 2.00 to 8.00 metres, custom sizes on request.

Roof style and design

Pfalz, Rheinhessen, Fürth or Monte Carlo, plus colour, lettering and decoration to suit your market and your brand.

Equipment for your products

Electrics, lighting, counters, a sink or fitting your own appliances: we plan the stall around the way you work.

Transport and loading

With rack jacks or, with optional accessories, by crane using special steel brackets. Matching transport trailers on request.

Sizes and roof styles

Wooden market stalls in 13 standard lengths, several roof styles

As standard, we build market stalls from 2.00 to 8.00 metres long in 50-centimetre steps, with a body width of approx. 2.55 metres. Every roof style is available in every standard length. We build custom sizes on request. Every market stall is a wooden stall on a hot-dip galvanised steel frame.

The 13 standard lengths of our market stalls with dimensions
Body length Floor area, body approx. 2.55 m wide Overall length Pfalz Overall length Rheinhessen, Fürth, Monte Carlo Roller shutters Construction
2.00 m approx. 5.1 m² approx. 2.60 m approx. 2.10 m 1 KVH timber frame
2.50 m approx. 6.4 m² approx. 3.10 m approx. 2.60 m 1 KVH timber frame
3.00 m approx. 7.7 m² approx. 3.60 m approx. 3.10 m 1 KVH timber frame
3.50 m approx. 8.9 m² approx. 4.10 m approx. 3.60 m 1 KVH timber frame
4.00 m approx. 10.2 m² approx. 4.60 m approx. 4.10 m 1 KVH timber frame
4.50 m approx. 11.5 m² approx. 5.10 m approx. 4.60 m 2 KVH timber frame
5.00 m approx. 12.8 m² approx. 5.60 m approx. 5.10 m 2 KVH timber frame
5.50 m approx. 14.0 m² approx. 6.10 m approx. 5.60 m 2 reinforced
6.00 m approx. 15.3 m² approx. 6.60 m approx. 6.10 m 2 reinforced
6.50 m approx. 16.6 m² approx. 7.10 m approx. 6.60 m 3 reinforced
7.00 m approx. 17.9 m² approx. 7.60 m approx. 7.10 m 3 reinforced
7.50 m approx. 19.1 m² approx. 8.10 m approx. 7.60 m 3 reinforced
8.00 m approx. 20.4 m² approx. 8.60 m approx. 8.10 m 3 reinforced

The floor area is the body: length times approx. 2.55 metres width. The overall length includes the roof overhang. For your pitch, add the folding canopy: it projects 60 centimetres. Height: Pfalz, Rheinhessen and Fürth approx. 3.30 metres, Monte Carlo approx. 3.10 metres. The front counter is 60 centimetres deep, 27 millimetres thick and 1.00 metre high as standard, measured from the outside. From 5.50 metres we use a reinforced construction. All figures are approximate; the quote is binding.

Four roof styles, one standard specification

Pfalz, Rheinhessen, Fürth and Monte Carlo are roof styles, not sizes. Other roof styles and individual designs on request.

Roof style Market stall with Pfalz roof style, 4 m, with tower, dormer and lighting as optional extras Image 19

Pfalz market stall

Roof
Continuous roof surface facing the sales side
Height
approx. 3.30 m
Lengths
2.00 to 8.00 m

Shown with tower, dormer and lighting as optional extras.

Roof style Market stall with Rheinhessen roof style, 5 m, with prominent gable facing the sales side and lighting Image 01

Rheinhessen market stall

Roof
Distinctive gable facing the sales side
Height
approx. 3.30 m
Lengths
2.00 to 8.00 m

Shown with pull-out counter, lighting and optional accessories.

Roof style Two Fürth market stalls with double gable forming a 12 m front, lighting as an optional extra Image 155

Fürth market stall

Roof
Double gable facing the sales side
Height
approx. 3.30 m
Lengths
2.00 to 8.00 m, modules can be combined

Shown: two 6 m stalls forming a 12 m sales front, lighting as an optional extra.

Roof style Market stall with Monte Carlo roof style, 4 m, with curved roof, skylight and lighting Image 02

Monte Carlo market stall

Roof
Round roof with skylight
Height
approx. 3.10 m
Lengths
2.00 to 8.00 m

Shown with lighting as an optional extra.

The photos show example builds, some with optional extras. Simply quote the image number in your enquiry.

Price examples

Market stalls for sale: what a stall costs

If you want to buy a market stall, here are two examples from our catalogue, each with standard equipment. Your exact quote depends on the length, the roof style and the equipment you add.

Schematic drawing of the Pfalz market stall with 5 m body length and standard equipment, front view
Schematic drawing, standard equipment, not to scale

Pfalz market stall, 5 m body length

€22,137.57incl. 19% German VAT · €18,603.00 net

The price includes the standard equipment:

  • Steel base frame, hot-dip galvanised, with four jack points
  • Plastic roof with shingle effect, one continuous roof surface facing the sales side
  • Lockable door and two wooden windows with glazing bars
  • Front counter and folding canopy
  • Two manual aluminium roller shutters
  • Floor with epoxy resin coating, timber with two coats of stain

Not included: electrical installation, lighting, electric roller shutters, jacks, forklift pockets, chassis, delivery and installation.

Enquire about this example
Schematic drawing of the Rheinhessen market stall with 4 m body length and standard equipment, front view
Schematic drawing, standard equipment, not to scale

Rheinhessen market stall, 4 m body length

€17,722.67incl. 19% German VAT · €14,893.00 net

The price includes the standard equipment:

  • Steel base frame, hot-dip galvanised, with four jack points
  • Plastic roof with shingle effect, prominent gable facing the sales side
  • Lockable door and two wooden windows with glazing bars
  • Front counter and folding canopy
  • One manual aluminium roller shutter
  • Floor with epoxy resin coating, timber with two coats of stain

Not included: electrical installation, lighting, electric roller shutters, jacks, forklift pockets, chassis, delivery and installation.

Enquire about this example

Prices ex works Wanzleben, as of 22 October 2026. We charge delivery and installation at your site separately. The full standard equipment is listed under Equipment, and we will list accessories and optional extras in your quote.

Request the catalogue with all prices Free · no obligation · by email
Stall planner

Your length, your roof, your equipment

You have seen the sizes. In the stall planner you put together your own: roof style Pfalz, Rheinhessen, Fürth or Monte Carlo, 2 to 8 metres long, equipment, lighting and technology. At the end, send us the configuration with one click and we will cost it for you.

  • Pfalz, Rheinhessen, Fürth, Monte Carlo
  • 2 to 8 metres
  • Lighting and electrics
Configure my stall Free · no sign-up · no obligation
4.00 m Pfalz · 4.00 × approx. 2.55 m
Equipment

What comes as standard, and what you can add

The standard specification applies to all roof styles. Electrics, lighting, jacks, forklift pockets and chassis can be ordered separately. We set out the exact scope of delivery in the quote.

Standard equipment

Standard specification as per catalogue

  • Steel base frame, hot-dip galvanised, with four jack points and four lashing eyes for securing in transit
  • Floor made of 21 mm birch film-faced plywood with epoxy resin coating
  • Frame of KVH structural timber up to 5 m, reinforced construction from 5.50 m
  • Wall and roof cladding made of multiplex plywood boards
  • Timber surfaces primed once and given two coats of stain in one colour
  • Roof: shingle-effect plastic roof on Pfalz, Rheinhessen and Fürth, curved roof with skylight on Monte Carlo
  • Lockable door
  • Front counter 60 cm deep, 27 mm thick, height 1.00 m measured from the outside
  • Folding canopy with 60 cm projection
  • Two wooden windows with glazing bars 110 × 50 cm
  • Manual aluminium roller shutters: one up to 4 m, two from 4.50 to 6 m, three from 6.50 to 8 m

Electrics and lighting

Fully installed on request

  • Electrical installation with 16, 32 or 63 A
  • Electric roller shutter operation instead of manual operation
  • Wooden light strips, from untreated and pre-fitted to fully wired with LED bulbs
  • Recessed LED spotlights 40 watts

Fit-out and appliances

To suit the way you work

  • Back counter and side counters, 60 cm deep
  • Cupboard doors 50 × 85 cm under the counter
  • Double sink with tap, 5-litre water heater and plumbing
  • Fitting your appliances by arrangement, such as refrigeration or kitchen equipment
  • Glass counter 30 cm, with shelf on request
  • Click vinyl flooring

Design and decoration

So the stall suits your products

  • Dormer with window, shingle roof and lighting
  • Additional glazing-bar and gable windows
  • 3D wall panels, for example with a brick effect
  • Two-colour exterior stain and roof covering in glass-fibre reinforced plastic (GRP) with shingle effect
  • Lettering, graphics and hand painting done in-house

Transport accessories

For loading and transport

  • Rack jacks with 1.5 or 3 tonne capacity
  • Steel brackets for crane loading for the lower frame openings, optional accessory
  • Forklift pockets, only with a new order, cannot be retrofitted
  • Transport trailer to suit dimensions and weight
  • Chassis, conventional or with lowering air suspension; the jack points are then omitted. See catering trailers
Loading

Flexible loading with jacks or crane

The hot-dip galvanised steel base frame has four jack points. With matching rack jacks you lift the stall off the transport trailer and level out any slope on your pitch. Alternatively, it can be loaded by crane: special steel brackets for the lower frame openings are available as an optional accessory. We agree the process with you.

Loading with rack jacks. The video shows the process from trailer to standing stall.
  1. 1

    Delivery

    The stall sits on the transport trailer, secured by four lashing eyes. On request, we fit through-going forklift pockets when you order.

  2. 2

    Unloading

    With four rack jacks in the jack points you lift the stall, drive the trailer out and lower the stall. Alternatively by crane using the steel brackets (optional accessory).

  3. 3

    Opening

    Fold out the canopy, raise the shutter, and the counter is open. Optional electric roller shutters work at the press of a switch.

  4. 4

    Storage

    After the season, the same steps in reverse. On request, we store the stall at our site in Wanzleben out of season.

Jacks, steel brackets and trailers are accessories. We supply rack jacks with 1.5 and 3 tonne capacity, plus matching transport trailers. We are happy to check whether jacks you already own will fit. On a stall with a chassis, the jack points are omitted.

Stalls we have built

Individual design: real examples from our factory

We match the base, roof style, gable, lettering, colour and lighting to your products.

Wooden Christmas market stall in use, with goods on the counter and a gable sign Image 101

Christmas market stall

With string lights all round, a gable sign and a garland, designed to suit the products.

Christmas market
Pfalz market stall with tower, dormer and brick effect as optional extras Image 102

With tower and dormer

Pfalz with tower, dormer and brick effect as optional extras. Carpentry from our own workshop.

Custom version
Market hut with brick base and roof topper in the workshop Image 103

With brick base

Brick-effect 3D wall panels below the counter, fitted and sealed.

Optional extras
Illuminated market stalls at a Christmas market at night Image 104

When it gets dark

Wooden light strips with E27 sockets and warm white LED bulbs, fully wired and fitted on request.

Lighting
Market stall with three poseur tables with built-in bins in front Image 105

With poseur tables

Poseur tables with a built-in bin, available as accessories to order with the stall.

Accessories
Gallery

Ideas for your market stall

Christmas market stalls, market huts and sales stands from our factory: every stall is tailored to its products and its pitch. Scroll through, and if you see something you like, simply quote the image number in your enquiry.

Small market stall with gable sign as a sausage grill Image 106
Short frontCompact for small pitches.
Market hut with tower top in front of a historic façade Image 107
With tower topFor squares where the stall has to hold its own against the architecture.
Long market stall with several hatches across the whole front Image 108
Long frontSeveral hatches along the full length.
Illuminated wooden Christmas market stall in the evening Image 109
In the eveningWooden light strips with warm white LED bulbs.
Market stall with the aluminium roller shutter closed after market hours Image 110
After closingWith the aluminium roller shutter closed.
Market hut in a town centre with customers in front Image 111
In the town centreSet up on paving in a town setting.
Market stall as a bar with A-board and lettering Image 112
As a barLettering and A-boards come from our in-house graphics team.
Market stall with hatches wide open and a clear counter Image 113
Fully openHatches up, the full width as sales area.
Snack hut with brick base and Christmas decorations Image 114
Snack bar with baseBrick-effect 3D wall panel below the counter.
Crêpe stall at night with illuminated lettering Image 115
With illuminated signWe make the signage in-house too.
Market stall with red and white roof at night Image 02
Different roofRoof covering and colours to your specification.
Christmas market with market stalls and a Ferris wheel in the background Image 117
A whole marketSeveral stalls, each with its own theme.

The images show example builds. You will find more projects, sorted by product group, under Projects

Frequently asked questions

Before you order: what buyers want to know

What does a market stall cost?

Two examples from our catalogue, each with standard equipment, ex works, excluding delivery and installation, prices as of 22 October 2026: Rheinhessen with a 4 m body length costs €17,722.67 incl. 19% German VAT, Pfalz with a 5 m body length €22,137.57 incl. 19% German VAT. The price depends on length, roof style and equipment; we price custom versions individually. We will send you our catalogue with prices on request. For a more precise figure, put your stall together in the Stall planner and send the configuration with your enquiry.

When will I get my stall?

We agree delivery dates with you individually. Please ask us whether a suitable model is in stock. We build all others after agreed planning and scheduling. The earlier you enquire, the more room there is for design and timing.

How is the stall protected against the weather?

The steel base frame is hot-dip galvanised, the timber surfaces are primed once and given two coats of stain, and the floor has an epoxy resin coating. We are happy to advise you on care and re-staining.

Do I need a permit for my market stall?

Whether your stall needs a permit is decided by the local council and the event organiser. Clarify the pitch and any conditions with them in advance. We offer the required inspections and inspection log books together with our partners; we clarify in the quote which documents your project needs.

What size do I need for my pitch?

We build 13 standard lengths from 2.00 to 8.00 metres in 50-centimetre steps, with a body width of approx. 2.55 metres. For your pitch, add 60 centimetres for the unfolded canopy; the roof overhang adds to the length. If your pitch has a corner, send us a sketch and we will work it out.

What is the difference between Pfalz, Rheinhessen, Fürth and Monte Carlo?

They are roof styles, not sizes. Pfalz has one continuous roof surface facing the sales side, Rheinhessen a prominent gable facing the sales side, Fürth a double gable and Monte Carlo a curved roof with skylight. All four are available in the 13 standard lengths.

Can I hire a stall instead of buying one?

Yes, through our hire partner. You can send a hire enquiry under Hire. If you buy, we can arrange leasing or hire purchase on request.

How do I get the stall onto the pitch and off again?

With four rack jacks in the jack points of the steel frame you lift the stall off the trailer and level it. Alternatively it can be loaded by crane; special steel brackets for the lower frame openings are available as an optional accessory. We supply jacks with 1.5 or 3 tonne capacity and matching transport trailers as accessories.

Will I be able to get spare parts later?

We assess spare parts, repairs and modifications individually based on your product details, photos and dimensions, for older stalls too. More under Spare parts and accessories.

Are used market stalls available?

Depending on stock. We publish our current used listings on Facebook; more under Used stalls.

How is it different from a catering trailer?

A market stall stands on a steel base frame and is loaded and unloaded with jacks or, with optional accessories, by crane. A catering trailer has its own hot-dip galvanised chassis and is towed. They differ in transport, set-up, space required, serving height and equipment; you will find both designs under Catering trailers side by side.

Enquiry

Let’s plan your market stall

Tell us the length, roof style, equipment and date, ideally with the image number of a stall you like. We will advise you personally and prepare a suitable quote.

    Only name, email and phone are required. Everything else helps us put together the right quote for you.

    Looking to hire? Hire enquiries are handled by our hire partner: go to the hire form.

    We will email you our catalogue with prices after your enquiry.


    Free · no obligation · a few lines are enough

    Your details go to our factory in Wanzleben. Not passed on for advertising purposes.
    Encrypted transmission. No newsletter sign-up, no reselling of data.